The hand sanitizer filling production line is mainly for filling and packaging machinery lines customized for hand sanitizer, hand gel, shampoo, shower gel, etc.

The main mechanical components are:

Gravity filling machine

technical parameter:

Belt clamp rotary capping machine

technical parameter:

1. Lid sorting method: manual lid sorting

2. Suitable for bottle specifications: according to the model provided by the customer

3. Lower cover form: manual lower cover

4. The form of screw cap: belt clip screw cap

5. Speed: 1000~5000 bottles/hour

6. Material: stainless steel frame

7. Program control: frequency converter speed regulation

8. The conveyor belt uses 82mm wide POM chains, and the conveyor belt surface is 750±25mm high from the ground.

9. The conveying motor adopts frequency conversion drive motor with a speed of 0~10 meters/minute.

10. Machine power: about 1.2KW

11. Air pressure: 0.6-0.8MPa

Vertical round bottle positioning labeling machine

technical parameter;

1. Applicable bottle range: provide samples according to customers;

2. Applicable label range: provide samples according to customers;

3. Production capacity: 1000~5000 bottles/hour

4. Labeling accuracy: ±1mm

5. The conveyor belt uses 82mm wide POM chains, and the conveyor belt surface is 750±25mm high from the ground.

6. Conveying motor: 140W frequency conversion motor

7.Power supply: 220V/50HZ single phase;

8. Power: about 0.6KW;

9. Program control: PLC and touch screen man-machine;

10. Applicable paper roll: 76mm inner diameter and 300mm outer diameter.

The filling production line integrated production expert around you

Tengzhuo was founded in 2011 and has more than ten years of experience in the packaging equipment industry. Design the filling production line according to your requirements and workshop layout.

Our products include: filling production lines, bottle washing machines, filling machines, capping machines, labeling machines, sleeve labeling machines, cartoon palletizing machines, etc.

The main electrical components are all from international brands, such as PLC and touch screen from Siemens, servo from Panasonic or Schneider, cylinder from Airtac, and power switch from Schneider. Each piece of stainless steel is made of thick 304 material and will never rust.

The products have passed CE certification.

Our company has 16 senior engineers and designers, 5 CNC lathes and milling machines, and more than 10 other professional production machines and equipment. We have truly integrated R&D, design, processing, assembly, installation and debugging to meet all your pre-sales, installation, production and after-sales problems.